Many friends are very worried about the heat dissipation of the computer in summer, and the temperature of the processor is even more worrying. Consider changing to a more powerful radiator? Don't you first understand the knowledge that these radiators are reproduced from the computer Pepsi network before you make a move? Believe me, if you understand these points, you will definitely make your shots more stable and ruthless. Reprinted from Computer Pepsi.com Reprinted from Computer Pepsi.com Reprinted from Computer Pepsi.com Reprinted from Computer Pepsi Network not that simple! Reprinted from Computer Pepsi Network Reprinted from Computer Pepsi Network Reprinted from Computer Pepsi Network The material of CPU heat sink is mainly copper and aluminum. Because of the specific heat capacity and density of metal, copper absorbs heat quickly and conducts heat quickly, but it also heats up quickly, and aluminum is just right On the contrary, it is impossible to say who is better to reproduce some from the computer Pepsi network. The heat sink for high-frequency processors combines their advantages, using the copper core on the bottom surface and the design of aluminum heat dissipation fins, the effect is very good, and it is worth choosing. Reprinted from Computer Pepsi Network Reprinted from Computer Pepsi Network Reprinted from Computer Pepsi Network The wind direction varies, how should I choose? There are two fan designs for CPU radiators, one is the traditional downward blowing method, which blows directly on the bottom of the radiator and has a more compact structure. The side blowing method is that the fan is on the side of the radiator. It can be reproduced from the computer Pepsi.com to use larger fans and multiple fans, but it must ensure that the heat is quickly transferred to the fins. Generally, the method of multiple heat pipes is used, which is expensive and takes up a lot of space. Big. Reprinted from Computer Pepsi.com Reprinted from Computer Pepsi.com Reprinted from Computer Pepsi Network The design of the Tao, the small chassis has no choice, and it can be installed directly by blowing it directly. The large chassis can be installed with side blowing. The direction of the air blowing should match the air channel of the chassis as much as possible. After forming a good air channel, it can also help the memory and power supply unit to dissipate heat. Reprinted from Computer Pepsi.com Reprinted from Computer Pepsi.com Reprinted from Computer Pepsi Network Leave room for memory, but only general memory sticks can be installed below, and memory with larger heat sinks is still enough. Also pay attention to the height of the radiator that the case can accommodate. If you can't close the case cover after installing the radiator, it will be embarrassing. For heat pipe radiators, don’t just look at the number. Generally, the thermal conductivity of three or four heat pipes can handle the heat of high-end processors, so there is no need to pursue a particularly large number of heat pipes. The most obvious impact on the cooling effect,